CE FFP Face Mask Adjustable Respirator Face Mask Non Woven Fabric Material

CE Approved FFP2 Save Mask , FFP2 Dust Mask , Adjustable Respirator Face Mask

1 . Descriptions

MX-2005 FFP2 Cup Mask use adjustable aluminum nose clip so it makes wearing more sealless leakage ,use latex-free elastic strap , soft nose liner so it make softer and fit the face .And use easy-breathing valve then it makes breathing more smooth .

2 . Material of each layer

Outer layer : Protective needle punched cotton
Middle layde : FFP2 melt blown filter(have filter efficiency level of 94%)
Inner layer : Shaped needle punched cotton

3 . Certification

This product has been tested according to the following European Standard:

• EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.
• EU type examination certificate (module B) issued by BSI , notified body n°0086.The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086.

4 . Packing

The package of this cup mask with valve is 20pcs/box , 20box/carton and the size of the carton is 64.5*54*27cm

5. Protection level

FFP2 NR provides protection against non-toxic or low to moderately toxic solid and liquid aerosols having a concentration of up to 12 times

the TLV (threshold danger limit value) or 10 times the APF (assigned protection factor).

6 . Expiry date

If maintained as per storage instructions , products can be used up to 5 years from date of manufacture.

7 . FAQ

Q:Are you a manufacturer or a trading company?

A:We are a manufacturer located in Zhejiang,China. Welcome to visit our factory.

Q: Can you provide free samples?

A: All samples are provided freely, it will takes3-5 days to prepare the samples.

Q: How does your factory control the quality?
A: All manufacturing are absolutely base on the pre-production samples. Meanwhile, we have a complete after-sales system.

Q: Could you embossed printing the logo on the face mask?
A: Yes, we can embossed printing the logo on the surface of face mask, OEM production is ok.

8 . More pictures